The brass embedding wheel has a groove for the wire to run in holding it much more securely. On either side of the groove, are small "grippers", which embed the wire much better.
9-1/8" Made from commercial grade, white pine lumber. Fits deep hive bodies. Grooved top and bottom bar. Nails are not included, but can be ordered separately
6-5/8" box; inside dimesions are 12 5/16" width x 19 3/16"
Made from commercial grade, white pine lumber.
Long sides are pre-drilled, but short ends are not. Please drill pilot holes before...
Spacer rims are assembled: glued, stapled with dovetail joint. 2 1/8" depth. Can be used for feeding (winter patties, fondant, dry sugar, pollen patties), medicaton applications (Formic Pro),...
Tool has two cutting edges, which are beveled. These blades will make it much easier to clean off burr comb and propolis. The hooked end will lift out frames by creating a leverage.
Reversible metal mouse guard. Can be flipped to block entrance with ventilation for moving or remove completely. Fits a variety of 8 frame bottom board style hives with or without trimming...
This frame grip has been around for decades and is still the best tool for getting out those tight, glued up frames. Smooth molded aluminum with spring action. It clamps the frame snugly...
This screened bottom board has two entrances on opposing corners. When operating the NUC as a 6 frame colony, one entrance can be closed completely to allow a single entrance for a single...
We recommend using Tite Bond glue when assembling your polystyrene hives as well as wood frames and boxes. It’s best to glue AND nail frames for durability and peace of mind. Doing both...
Orange is used in a 10 Frame super to evenly space 9 frames to allow for easier uncapping. Blue is used in an 8 Frame super to space 7 frames with ease.